N. System's Trigger Check; O. System's Status Check; S. Trunk Release (Channel 3) Output 1 - Autopage C3-RS-1000 OLED Operation Manual

Professional oled 2-way 915 mhz. fm remote car starter & 6 channel alarm system with built-in temperature sensor and two-way serial port data link
Table of Contents

Advertisement

SVMASTER -
*Note : If you use password pin code to double protect the vehicle security, you will need to use it to
completely disarm the system.

N. SYSTEM'S TRIGGER CHECK

Spin up the
switch to the page
Check" button. The remote will respond with one melody sound and
all trigger records will immediately be displayed on the OLED
screen.
Note: It will display the homepage if there were no system's
triggered.

O. SYSTEM'S STATUS CHECK

Spin up the
switch to the page
Check" button. The remote will respond with one melody sound and
the vehicles status will immediately be displayed on the OLED
screen.
Note: It will display the home page if the car's status is normal.
P. DRIVER PAGING / LOST & FOUND
This feature is useful in the event that someone wants to page the driver of the parked vehicle or you cannot
find his OLED remote transceiver.
Indoor Driving Paging
If the ignition switch is in the "off" position, press and hold the valet switch for 2 seconds
to page the driver. One chirp sound shall be emitted from the vehicle and the paging
melody will sound from your Remote OLED transceiver. " D RIVER PAGING" indication
will flash on the OLED screen.
Outdoor Driving Paging
If someone tries to page you by tapping the paging (knock) sensor, the paging melody will sound on your
Remote OLED transceiver and "DRIVER PAGING" indication will flash on the OLED screen. The knock
sensor is usually located on the driver's side of the front windshield.
Spin up the
1.
from the vehicle. A melody sound and "DRIVER PAGING" indication flashes on the OLE D screen to
confirm the function has been turned ON.
2. When tapping the paging (knock) sensor on the vehicle, one chirp sound will be emitted and the paging
melody will sound from the Remote OLED transceiver. The "DRIVER PAGING" indication will flash on the
OLED screen.
3. Turning ON the ignition switch or pressing the
Q. DOME LIGHT CONVENIENCE DELAY & SUPERVISION
The alarm has a unique feature, which will turn on your vehicle's dome light as follows:
1.Upon disarming, the interior light will remain on for 30 seconds.
2.If the vehicle is intruded, the interior light will flash for the same duration as the siren.
Note: Turning ON the ignition switch or arming the alarm will turn off the dome light.
R. IGNITION CONTROL DOOR LOCK/UNLOCK.
If the vehicles power door locks have been interfaced to the security system, the system will automatically
lock the vehicle's doors in 3 seconds when the ignition is turned "ON" and /or unlock the vehicle's doors when
the ignition is turned "OFF". (Programmable)
S. TRUNK RELEASE (CHANNEL 3) OUTPUT.
Press and hold
trunk release or other electric devices.
T. CHANNEL 4/5/6 TIMER CONTROL OUTPUT
Activate The Channel 4: Spin up the
the transmitter
Activate The Channel 5: Spin up the
the transmitter
Activate The Channel 6: Spin up the
the transmitter
SVMASTER -
C3RS1000 OP 3/08
and then press the "Trigger
4
4
and then press the "Status
(optional)
switch to the page
and then press the "Driver Pager" button. It will respond with chirps
4
button on the transmitter for three seconds to remotely control the
switch to the page
and
buttons at the same time to active Channel 4 function.
switch to the page
and
buttons at the same time to active Channel 5 function.
switch to the page
and
buttons at the same time to active Channel 6 function.
button or
button will exit the driver paging mode.
and then press the "Channel 4" button or press
3
and then press the "Channel 5" button or press
3
and then press the "Channel 6" button or press
3
18
http://www.msvmaster.lv
-
http://www.msvmaster.lv
-

Advertisement

Table of Contents
loading

Table of Contents