Porter-Cable PCB222TS Instruction Manual page 5

moving parts, breakage of parts, mounting and
any other conditions that may affect its operation.
A guard or other part that is damaged should be
properly repaired or replaced.
0. NEvEr LEAvE THE TOOL ruNNINg
UNATTeNDeD. TURN THe POWeR "OFF". Do not
walk away from a running tool until the blade comes
to a complete stop and the tool is unplugged from
the power source.
. dO NOT OvErrEAcH. Keep proper footing and
balance at all times.
. mAINTAIN TOOLS WITH cArE. Keep tools sharp
and clean for best and safest performance. follow
instructions for lubricating and changing accessories.
3. dO NOT use power tool in presence of flammable
liquids or gases.
pOWEr TOOL SAfETY
4. dO NOT operate the tool if you are under the
influence of any drugs, alcohol or medicationn that
could affect your ability to use the tool properly.
5. Dust generated from certain materials can be
hazardous to your health. Always operate saw in
well-ventilated area and provide for proper dust
removal.
6.
WArNINg
!
consult their physician(s) before using this product.
Operation of electrical equipment in close proximity
to a heart pacemaker could cause interference or
failure of the pacemaker.
7. WEAr HEArINg prOTEcTION to reduce
the risk of induced hearing loss.
5
People with electronic devices,
such as pacemakers, should