Push Stick Pattern - Porter-Cable PCB222TS Instruction Manual

puSH STIcK pATTErN

puSH STIcK cONSTrucTION
• Use good quality plywood or solid wood
• Use / in. (3 mm) or 3/4 in. (9 mm) material
• Push stick MUST be thinner than the width of
material being cut
Drill hole for
hanging
Notch for Prevent
hand from Slipping
Cut here to Push / in.
(3 mm) Wood
Cut here to Push 3/4 in.
(9 mm) Wood
90°
0° - 30°
37