Porter-Cable PCB222TS Instruction Manual page 32

knife when using a dado blade. Always use caution
when operating a dado blade.
6. Use only the correct number of round outside blades
and inside chippers as shown in the dado set's
instruction manual. Blade or chipper must not exceed
/ inch (.7 mm).
7. Check saw to ensure that the dado will not strike the
housing, insert, or motor when in operation.
Fig. dd
WArNINg
!
For your own safety, always replace the blade, blade
guard assembly, anti-kickback pawls assembly,
riving knife assembly and table insert after finishing
a dado operation.
Fig. ee


3
Dado Cut
3