Remote Operation; Changing The Display To Celcius (C); Display Overview; Listen For The "Beep - Lopi Cypress GSR Owner's Manual

Operation
29

Remote Operation

Once the receiver is switched to "REMOTE" the transmitter operates the fireplace. Once you understand
how the transmitter works, you will be able to operate your fireplace quickly and easily.

Changing the Display to Celcius (C)

With the remote off, press the thermostat and mode button simultaneously. This will toggle between
Fahrenheit and Celcius.

Display Overview

The transmitter display has four main sections (see Figure 4).
Thermostat Display
Room Temperature Display
C
ON
Read-Out (Thermostat Setting, Function, etc.)
Mode Display (Flame Height, Comfort Control)
MAX
Figure 4

Listen for the "Beep"

Each time you press a button on the transmitter that controls the fireplace, a "beep" will come from the
fireplace. When you change thermostat target settings the fireplace will not beep.
NOTE: When the receiver batteries start to get low, the receiver will beep intermittently. When the
batteries are nearly depleted, the receiver will no longer beep. See "Receiver Batteries" on page 33).
© Travis Industries 4121109 100-01329.docx