Appendix B: Configuring The Pcs - Planet WNRT-627 User Manual

Appendix B: Configuring the PCs

In this section, we'll introduce how to install and configure the TCP/IP correctly in Windows XP. First
make sure your Ethernet Adapter is working, refer to the adapter's manual if needed.
2. Install TCP/IP component
1) On the Windows taskbar, click the Start button, point to Settings, and then click Control
Panel.
2) Click the Network and Internet Connections icon, and then click on the Network
Connections tab in the appearing window.
3) Right click the icon shown below, select Properties on the prompt page.
4) On the prompt page shown below, double click on the Internet Protocol (TCP/IP).
Figure B-1 Network Connections Properties
-155-
User's Manual of WNRT-627