Planet WNRT-627 User Manual page 89

The page includes the following fields:
Object
Packets Statistics
Interval (5~60)
DoS Protection
Enable ICMP-FLOOD
Attack Filtering
ICMP-FLOOD Packets
Threshold (5~3600)
Enable UDP-FLOOD
Filtering
UDP-FLOOD Packets
Threshold (5~3600)
Enable TCP-SYN-FLOOD
Attack Filtering
TCP-SYN-FLOOD
Packets Threshold
(5~3600)
Ignore Ping Packet From
WAN Port
Forbid Ping Packet From
LAN Port
Click the Save button to save the settings.
The default value is 10. Select a value between 5 and 60 seconds from
the drop-down list. The Packets Statistics Interval value indicates the
time section of the packets statistics. The result of the statistics is used
for analysis by SYN Flood, UDP Flood and ICMP-Flood.
Denial of Service protection. Check the Enable or Disable button to
enable or disable the DoS protection function. Only when it is enabled,
will the flood filters be enabled.
Enable or Disable the ICMP-FLOOD Attack Filtering.
The default value is 50. Enter a value between 5 ~ 3600. When the
current ICMP-FLOOD Packets number is beyond the set value, the
Router will startup the blocking function immediately.
Enable or Disable the UDP-FLOOD Filtering.
The default value is 500. Enter a value between 5 ~ 3600. When the
current UPD-FLOOD Packets number is beyond the set value, the
Router will startup the blocking function immediately.
Enable or Disable the TCP-SYN-FLOOD Attack Filtering.
The default value is 50. Enter a value between 5 ~ 3600. When the
current TCP-SYN-FLOOD Packets numbers is beyond the set value,
the Router will startup the blocking function immediately.
Enable or Disable Ignore Ping Packet From WAN Port. The default
setting is disabled. If enabled, the ping packet from the Internet cannot
access the Router.
Enable or Disable Forbid Ping Packet From LAN Port. The default
setting is disabled. If enabled, the ping packet from LAN cannot access
the Router. This function can be used to defend against some viruses.
Table 5-28
-89-
User's Manual of WNRT-627
Description