Planet WNRT-627 User Manual page 157

Figure B-3 TCP/IP – Obtain an IP address automatically
 Setting IP address manually
1
Select Use the following IP address radio button.
2 If the Router's LAN IP address is 192.168.1.1, type in IP address 192.168.1.x (x is from 2 to 254),
and Subnet mask 255.255.255.0.
3
Type the Router's LAN IP address (the default IP is 192.168.1.1) into the Default gateway field.
4
Select Use the following DNS server addresses radio button. In the Preferred DNS Server
field you can type the DNS server IP address which has been provided by your ISP
User's Manual of WNRT-627
-157-