Configuring The Ip Address Manually - Planet WDRT-1200AC User Manual

4.1.2 Configuring the IP Address Manually

Summary:
 Set up the TCP/IP Protocol for your PC.
 Configure the network parameters. The IP address is
254), Subnet Mask is 255.255.255.0, and Gateway is
If you are sure the DHCP server of Wireless Router is disabled (the default setting of
you can configure the IP address manually. The IP address of your PC should be 192.168.1.xxx (the same
subnet of the IP address of the Wireless Router, and "xxx" is any number from 2 to 254), Subnet Mask is
255.255.255.0, and the Gateway is 192.168.1.1 (The default IP address of the Wireless Router)
1) Continue the settings from the last figure. Select Use the following IP address radio button.
2) If the LAN IP address of the Wireless Router is 192.168.1.1, enter IP address 192.168.1.x (x is from 2 to
254), and Subnet mask 255.255.255.0.
3) Enter the LAN IP address of the Wireless Router (the default IP is 192.168.1.1) into the default gateway
field.
4) Select Use the following DNS server addresses radio button. In the preferred DNS Server field, you can
enter the DNS server IP address provided by your local ISP. Then click OK to save your settings.
Figure 4-4 Obtain an IP Address Automatically
-19-
User Manual of WDRT-1200AC
("xxx" is any number from 2 to
192.168.1.xxx
(The Router's default IP address)
192.168.1.1
AP Mode and Client Mode),