Led Indications - Planet WNRT-627 User Manual

2.1.2 LED Indications

The front panel LEDs indicates instant status of port links, wireless data activity and system power,
and helps monitor and troubleshoot when needed.
of the Wireless Router.
LED Definition
LED Status
On
PWR
Off
On
SYS Flashing
Off
Flashing
WLAN
Off
On
LAN1-4
Flashing
Off
On
WAN
Flashing
Off
Slow Flashing
WPS
On
Quick
Flashing
1. When a device has been successfully added to the network by WPS function, the
WPS LED will keep on for about 5 minutes and then turn off.
2. When pressing and holding the WPS/Reset Button for more than 5 seconds, you
will reset the router.
Figure 2-2
Figure 2-2 WNRT-627 Front Panel
Power is on.
Power is off.
The Router is initializing.
The Router is working properly.
The Router has a system error.
The Wireless function is enabled.
The Wireless function is disabled.
A device is linked to the corresponding port but there is no activity.
An active device is linked to the corresponding port.
No device is linked to the corresponding port.
A device is linked to the corresponding port but there is no activity.
An active device is linked to the corresponding port.
No device is linked to the WAN port.
A wireless device is connecting to the network by WPS function. This
process will last for about 2 minutes.
A wireless device has been successfully added to the network by WPS
function. The LED will keep on for about 5 minutes.
A wireless device has failed to be added to the network by WPS
function.
Table 2-1 The LEDs indication
-18-
User's Manual of WNRT-627
and Table 2-1 show the LED indications
Function