Planet WNRT-627 User Manual page 98

The page includes the following fields:
Object
Enable Internet Access
Control
Rule Name
Host
Target
Schedule
Action
Status
Modify
To add a new rule, please follow the steps below.
Step 1. Click the Add New... button and the next screen will pop-up as shown in
Step 2. Give a name (e.g. Rule_1) for the rule in the Rule Name field.
Step 3. Select a host from the Host drop-down list or choose "Click Here To Add New Host
List".
Step 4. Select a target from the Target drop-sown list or choose "Click Here To Add New Target
List".
Step 5. Select a schedule from the Schedule drop-down list or choose "Click Here To Add New
Schedule".
Step 6. In the Action field, select Deny or Allow.
Step 7. In the Status field, select Enabled or Disabled to enable or disable your entry.
Step 8. Click the Save button.
Click the Enable All button to enable all the rules in the list.
Click the Disable All button to disable all the rules in the list.
Select the check box to enable the Internet Access Control function, so
the Default Filter Policy can take effect.
Here displays the name of the rule and this name is unique.
Here displays the host selected in the corresponding rule.
Here displays the target selected in the corresponding rule.
Here displays the schedule selected in the corresponding rule.
Here displays the action the Router takes to deal with the packets. It
could be Allow or Deny. Allow means that the Router permits the
packets to go through the Router. Deny means that the Router rejects
the packets to go through the Router.
This field displays the status of the rule. Enabled means the rule will
take effect, Disabled means the rule will not take effect.
Here you can edit or delete an existing rule.
Table 5-31
-98-
User's Manual of WNRT-627
Description
Figure 5-52.