Planet WNRT-627 User Manual page 125

The page includes the following fields:
Object
Time Zone
Date
Time
NTP Server Prior
To configure the system manually:
Step 1. Select your local time zone.
Step 2. Enter date and time in the right blanks.
Step 3. Click Save to save the configuration.
To configure the system automatically:
Step 1. Select your local time zone.
Step 2. Enter the IP address for NTP Server Prior.
Step 3. Click the Get GMT button to get system time from Internet if you have connected to the
Internet.
This setting will be used for some time-based functions such as firewall. You must
specify your time zone once you login to the router successfully; otherwise, these
functions will not take effect.
The time will be lost if the router is turned off.
1) The router will obtain GMT automatically from Internet if it has already been
connected to Internet.
Select your local time zone from this pull down list.
Enter your local date in MM/DD/YY into the right blanks.
Enter your local time in HH/MM/SS into the right blanks.
Enter the address for the NTP Server, then the Router will get the time
from the NTP Server preferentially. In addition, the Router builds in
some common NTP Servers, so it can get time automatically once it
connects the Internet.
Table 5-40
-125-
User's Manual of WNRT-627
Description