Host - Planet WNRT-627 User Manual

5.12.2 Host

Choose menu "Access Control → Host", you can view and set a Host list in the screen as shown in
Figure 5-55. The host list is necessary for the Access Control Rule.
The page includes the following fields:
Object
Host Description
Information
Modify
To add a new entry, please follow the steps below.
Step 1. Click the Add New... button.
Step 2. In the Mode field, select IP Address or MAC Address.
If you select IP Address, the screen shown is
1) In Host Description field, create a unique description for the host (e.g. Host_1).
2) In LAN IP Address field, enter the IP address.
If you select MAC Address, the screen shown is
1) In Host Description field, create a unique description for the host (e.g. Host_1).
2) In MAC Address field, enter the MAC address.
Step 3. Click the Save button to complete the settings.
Figure 5-55 Access Control host Settings
Here displays the description of the host and this description is unique.
Here displays the information about the host. It can be IP or MAC.
To modify or delete an existing entry.
Table 5-32
-101-
User's Manual of WNRT-627
Description
Figure 5-56.
Figure 5-57.