Planet WNRT-627 User Manual page 48

The page includes the following fields:
Object
User Name/Password
Secondary Connection
Connect on Demand
Connect Automatically
Time-based Connecting
Connect Manually
Sometimes the connection cannot be terminated although you specify a time to
Max Idle Time, since some applications are visiting the Internet continually in the
background.
Enter the User Name and Password provided by your ISP. These fields
are case-sensitive.
Disabled
Dynamic IP
Static IP
In this mode, the Internet connection can be terminated
automatically after a specified inactivity period (Max Idle Time) and
be re-established when you attempt to access the Internet again. If
you want your Internet connection to keep active all the time,
please enter "0" in the Max Idle Time field. Otherwise, enter the
number of minutes you want to have elapsed before your Internet
access disconnects.
The connection can be re-established automatically when it was
down.
The connection will only be established in the period from the start time
to the end time (both are in HH:MM format).
 Note:
Only when you have configured the system time on System Tools
-> Time page can the Time-based Connecting function take
effect.
You can click
connect/disconnect immediately. This mode also supports the Max
Idle Time function as Connect on Demand mode. The Internet
connection can be disconnected automatically after a specified
inactivity period and re-established when you attempt to access the
Internet again.
Table 5-4
-48-
User's Manual of WNRT-627
Description
The Secondary Connection is disabled by
default, so there is PPPoE connection only.
This is recommended.
You can check this radio button to use Dynamic
IP as the secondary connection to connect to
the local area network provided by ISP.
You can check this radio button to use Static
IP as the secondary connection to connect to
the local area network provided by ISP.
the Connect/ Disconnect button to