Lan - Planet WNRT-627 User Manual

5.5.2 LAN

Choose menu "Network→LAN", you can configure the IP parameters of the LAN on the screen as
below.
The page includes the following fields:
Object
MAC Address
IP Address
Subnet Mask
1. If you change the IP Address of LAN, you must use the new IP Address to
login the Router.
2. If the new LAN IP Address you set is not in the same subnet, the IP Address
pool of the DHCP server will change accordingly at the same time，while the
Virtual Server and DMZ Host will not take effect until they are re-configured.
Figure 5-16 LAN Settings
The physical address of the Router, as seen from the LAN. The value
can't be changed.
Enter the IP address of your Router or reset it in dotted-decimal notation
(factory default: 192.168.1.1).
An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
Table 5-9
-56-
User's Manual of WNRT-627
Description