Clearances To Combustibles - Bryant 355BAV Installation, Start-Up, And Operating Instructions Manual

If this furnace is installed with a direct- -vent (combustion air and
flue) system, a factory accessory termination kit must be installed.
In a direct- -vent system, all air for combustion is taken directly
from the outside atmosphere and all flue products are discharged to
the outside atmosphere. See furnace and factory accessory
termination kit instructions for proper installation.
These furnaces are shipped with the following materials to assist in
proper furnace installation. These materials are shipped in the main
blower compartment.
Fig. 3 - - Clearance to Combustibles
Installer Packet Includes:
Installation, Startup, and Operating Instructions
Service and Maintenance Instructions
User's Information Manual
Warranty Certificate
Loose Parts Bag includes:
Collector Box or Condensate trap extension tube
Inducer housing drain tube
1/2--- in CPVC street elbow
Drain tube coupling
Drain tube coupling grommet
Gas line grommet
Vent pipe grommet
Combustion--- air pipe grommet
Gas line entry hole filler plug
Power entry hole filler plug
Condensate trap hole filler plug
Vent and combustion--- air intake hole filler plug
Combustion--- air pipe perforated disk assembly
6
(LIT. TOP)
A09681
Quantity
1
1
2
1
1
1
1
1
1
2
3
2
1