Connector Function Blocks; Multi Connector - Omron G9SP Series Reference Manual

Connector Function Blocks

3-7 Connector Function Blocks
Section
Notation in function list
3-7-1

Multi Connector

3-7-2 Routing
3-7-1 Multi Connector
Basic Function
Diagram
General Description
Function Blocks
Name
Multi Connector
Routing
×: No, ❍: Yes
The Multi Connector function block outputs the status of the input signals.
The Multi Connector function block outputs input signals (up to 8 inputs) to
output signals (up to 8 outputs).
The input signals and output signals are associated one-to-one from number
1 to 8. The status of other input signals have no effect.
With an G9SP-series Controller, it is not possible to make a direct connection
from an input tag signal to an output tag. To do so, connect the signal by using
a Multi Connector function block.
Support Page
G9SP NE1A
❍ ❍
79
❍ ❍
80
Default
Section 3-7
Compatible unit versions
NE1A-series Controllers with unit
version 1.0 or later
Maximum Number of I/O
79