Working With Alarm - Tecsun PL-398MP Operation Manual

WORKING WITH ALARM

It is recommended to set the alarm by buzzer if you are not
familiar with the local radio frequency and air time.
SETTING THE ALARM (BY BUZZER)
1. Press & hold the [
until hours flashing in the upper
right corner, then rotate the
[TUNING] knob to adjust the
hours.
2. Press the [
rotate the [TUNING] knob to
adjust the minutes while minutes
flashing.
3. Press the [
confirm the setting.
※ If the [
] button has not been pressed again within 3
seconds, the unit will automatically confirm the alarm
setting.
HOW TO SET THE ALARM (BY RADIO OR MP3)
Alarm by radio station:
1. Turn on the radio, then tune into your favorite station for
alarm by radio and adjust your desired alarm volume
level.
2. Press the [ M ] button with " PRESET " flashing.
3. Press the [
the display to confirm the preset alarm station.
Alarm by MP3:
Push the [MP3
MP3 location.
Then set the alarm time:
1. Press & hold the [
upper right corner, then rotate the [TUNING] knob to
adjust the hours.
2. Press the [
adjust the minutes while minutes flashing.
PL-398MP
] button
] button, then
] button again to
] button immediately and "
Radio] switch on the back of the unit to
] button until hours flashing in the
] button , then rotate the [TUNING] knob to
flashing
Setting the alarm by buzzer
" shows on
17