Sleep Function; Clock Setting - Tecsun PL-398MP Operation Manual

SLEEP FUNCTION

1. Press & hold the [POWER]
button until "
or 1~120" show on the
display.
2. Rotate the [TUNING] knob
immediately to select sleep
timer from 1 ~ 120 minutes or
select permanently "
then wait until the radio
automatically turns on to
confirm the setting.

CLOCK SETTING

1. Press & hold the [TIME] button
until hours flashing, then rotate
the [TUNING] knob to adjust the
hour.
2. Press the [TIME] button, then
rotate the [TUNING] knob to
adjust the minutes while minutes
is flashing.
3. Press the [TIME] button to confirm the setting.
※ If the [TIME] button has not been pressed again within 3
seconds, the unit will automatically confirm the setting.
Note: You can also direct key-in the number to set the
clock after pressing & holding the [TIME] button.
Example: To set the clock to 6:35, press the numeric key
to enter 0
beep (B) sound suggesting that the time has been set.
16
SLEEP
" and "
6 3 5 ; then you will hear a prolonged
"
",
Sleep time range
flashing
PL-398MP