Tecsun PL-398MP Operation Manual page 29

QUESTIONS
When the alarm is
activated (alarm
by radio), there is
only noise with
the broadcast.
No sound while
connecting to
external MP3.
Radio malfunction. This may be
PL-398MP
ANSWERS
-Maybe you did not
set the proper radio
alarm station.
-Or there is no
broadcasting at
that radio station.
-Or you are in
another area where
there is no radio
station for your
preset frequency.
Have not pressed
the [POWER]
button.
caused by
interference, and
the computer
microchip does not
function properly.
SOLUTIONS
-Preset your alarm
station properly.
-Make sure there is
a radio broadcast in
your location.
-Or set the alarm by
buzzer.
Press the [POWER]
button until the "
flashes on the
display.
Remove the battery,
then you can reload.
If it is still not able to
work, please contact
your nearest dealer
for customer service.
"
27