Snooze Function; How To Change The Display Mode; Key-Lock Function - Tecsun PL-398MP Operation Manual

SNOOZE FUNCTION

When the preset alarm is activated, you can press the
[LIGHT / SNOOZE] to temporarily turn off the alarm, the
unit will start alarming again 5 minutes later.

HOW TO CHANGE THE DISPLAY MODE

With radio OFF: Repeat pressing
the [DISPLAY] button to view
temperature or alarm time display.
With radio ON: Repeat pressing the
[DISPLAY] button to view local time,
alarm time, temperature or signal
strength showing on the upper right
corner of the display.

KEY-LOCK FUNCTION

Press & hold the [
on the display to activate the key lock function.
Press & hold it again until "
deactivate the locking function.
PL-398MP
] button until "
" symbol disappears to
Press
" symbol appears
19