Listening To Stored Stations; Manual Memory Tuning; Auto Browse Memory; Direct Key In Memory Address - Tecsun PL-398MP Operation Manual

LISTENING TO STORED STATIONS

METHOD 1: MANUAL MEMORY TUNING
Press the [VM] button to enter the
memory mode, then rotate the
[TUNING] knob to tune into the
stored stations one by one.
METHOD 2: AUTO BROWSE MEMORY
1. Press the [VM] button followed by
"memory page" appearing in the
upper right corner to enter the
memory mode.
2. Press & hold the [VM] button until
"PRESET " flashing to auto scan
from one memory to another,
staying on each station for about
5 seconds.
To stop auto search memory,
simply press the [VM] button.
METHOD 3: DIRECT KEY IN MEMORY ADDRESS
1. Press the [VM] button to enter the memory mode.
2. Press the numeric keys [0] - [9] to enter the memory
address directly, and then press the
confirm.
Note: If the display shows "
the number, it means the entered memory address
does not exist.
14
Auto browse preset station
- - - -
"symbol after entering
Memory address
SLEEP
address state
flashing
SLEEP
button to
PL-398MP