Working With Station Memories; Semi-Automatic Station Storage; Ats (Auto Tuning Storage); Storing Stations Manually - Tecsun PL-680 Operation Manual

TECSUN RADIOS AUSTRALIA

WORKING WITH STATION MEMORIES

The PL-680 has 2000 station memories, which are organized over
12 memory pages.
1. Memory PAGE 0, noted as [P0], consists of 800 memories, 100
assigned for FM/MW/LW, 200 for SW & SSB and 100 for AIR
BAND.
2. Memory PAGE 1~12, noted as P1, P2, etc., each page consists of
100 memories, in total 2000 memories.
BAND
MEMORY
FM
MW
LW
SW
SSB
AIR
METHOD 1: STORING STATIONS MANUALLY
1. Press the [FM], [AM] (for MW and LW) or [SW] button for band
selection, then tune into your desired station.
2. Press the [MEMORY] button; the next available memory position
flashes.
3. Rotate the [TUNING] knob to specify your preferred memory
position.
4. Press the [MEMORY] button again to confirm. You can also wait
for 3 seconds to auto store the station into memory.
To store the station in a different memory page, press the
NOTE:
[ - PAGE + ] button.
METHOD 2:

SEMI-AUTOMATIC STATION STORAGE

While operating the "Auto Browse
Station" (refer to page 06) function,
you can simply press the [MEMORY]
button to store the station into memory
to avoid unwanted stations.
8
Memory for each Band ( 800)
PAGE P0 ATS
100
100
100
200
200
100
www.tecsunradios.com.au
Memory among all Band (1200)
PAGE 01-12
Each Memory ATS is available
Page can store for all Memory
100 Memories. Pages (except
Air Band)
Searching
Frequency
flashing
0 1 2 3 4 5
Ni-MH
FAST
Battery
MHz
FM
Auto browse station
ATS
PL-680