Sleep Timer; Time Setting - Tecsun PL-880 Operation Manual

SLEEP TIMER

1. In POWER OFF mode, press &
hold the [POWER] button untill
the sleep timer symbol "
flashes on the display.
2. Rotate the [TUNING] knob
immediately to select a sleep
timer from 1 - 120 minutes or
select "
mode (the radio will be turned on
after 1 second).
Note: The default setting of the sleep timer is "

TIME SETTING

1. Press & hold the [TIME] button
until the hours indicator starts
flashing. Rotate the [TUNING]
knob to adjust the hours, or
directly input the time by pressing
the [ 0 – 9 ] numeric keys.
2. While the hours indicator is flashing,
press the [TIME] button again to
select the minutes indicator.
Rotate the [TUNING] knob to
adjust the minutes, or directly enter
it by pressing the [0 – 9] numeric
keys.
3. Short press the [TIME] button to
confirm, or wait for 3 seconds
to automatically confirm the time
setting.
PL-880
SLEEP
" for POWER ON
flashing
SLEEP
"
Sleep time range
".
flashing
16