Sleep Function; Clock Setting - Tecsun PL-660 Operation Manual

SLEEP FUNCTION

1. Press & hold the [POWER] button
with the symbol of "
on the display to enter sleep timer
mode.
2. Rotate the [TUNING] knob
immediately to select sleep timer
from 1 ~ 120 minutes or select
permanently "
turned on after 1 second).
Note: Default setting for the sleep timer is 30 minutes.

CLOCK SETTING

1. Press & hold the [TIME] button with
hour flashing, then rotate the
[TUNING] knob to adjust the hour.
2. Press the [TIME] button with
minutes flashing, and then rotate
the [TUNING] knob to adjust the
minute.
3. Press again the [TIME] button to
confirm the setting.
※ If the [TIME] button has not been pressed again within 3 seconds,
the unit will automatically confirm the setting.
※ You can direct key in the number to set the hour/minutes instead
of rotating the [Tuning] knob.
PL-660...................................................................................13
" flashing
SL EEP
" (radio will be
www.tecsunradios.com.au
flashing
SL EEP
0 1 2 3 4 5
Ni-MH
Battery
SLOW
Time selection for sleep timer
flashing
Timer A
Ni-MH
Battery
Time setting