Auto Browse Memory; Listening To Stored Stations - Tecsun PL-660 Operation Manual

LISTENING TO STORED STATIONS

Select band and then press the
[VF / VM] button with "Memory
address" shows on the upper right
corner of display to enter the
[Memory] mode, press the [ - PAGE + ]
button to select your desired page,
then apply any of below three tuning
methods to tune around those stored
stations:
METHOD 1: MEMORY TUNING MANUALLY
Rotate the [TUNING] knob to tune around the stored station.
METHOD 2: AUTO BROWSE MEMORY
Press & hold the [VF / VM] button
until "PRESET" flashing to auto scan
from one memory to another, staying
on each station for about 5 seconds.
To stop auto search memory, simply
rotate the [TUNING] knob or to press
on [VF / VM] button again.
METHOD 3: DIRECT KEY IN MEMORY ADDRESS
Press the numeric keys [0] - [9] to enter the memory address
directly, and then press again the
Note: If the display shows "
number, it means the entered memory page/address does not exist.
12...................................................................................PL-660
button to confirm.
" symbol after entering the
www.tecsunradios.com.au
flashing
SL EEP
0 1 2 3 4 5
PAGE
Ni-MH
Battery
kHz
MW BW
Changing memory pages
SL EEP
0 1 2 3 4 5
PAGE
Ni-MH
Battery
MHz
FM

Auto browse memory

PRESET
flashing
PRESET