Listening To Stored Stations; Method 1: Memory Tuning Manually; Method 2: Auto Browse Memory; Method 3: Direct Key In Memory Address - Tecsun PL-660 Operation Manual

LISTENING TO STORED STATIONS

Select band and then press the [VF/VM]
button with "Memory address" shows on
the upper right corner of display to enter
the [Memory] mode, press the
[ - PAGE + ] button to select your desired
page, then apply any of below three tuning
methods to tune around those stored
stations:

METHOD 1: MEMORY TUNING MANUALLY

Rotate the [TUNING] knob to tune around the stored station.

METHOD 2: AUTO BROWSE MEMORY

Press & hold the [VF/VM] button until
"PRESET" flashing to auto scan from
one memory to another, staying on each
station for about 5 seconds. To stop auto
search memory, simply rotate the
[TUNING] knob or to press on
[VF/VM] button again.

METHOD 3: DIRECT KEY IN MEMORY ADDRESS

Press the numeric keys [ 0 ] - [ 9 ] to enter the memory address directly, and then
press again the [ ] button to confirm.
Note: If the display shows " " symbol after entering the number, it means
the entered memory page/address does not exist.
-- 17 -- .