Table of Contents
Advertisement
the last 30 seconds of counting down/up, and a triple beep sound will be produced
when the timer is up.
7.
To activate the presentation timer, press
press OK.
8.
A confirmation message appears. Highlight Yes and press OK on the projector or
remote control to confirm. You will see the message "Timer is On" displaying on
the screen. The timer starts counting when the timer is on.
To cancel the timer, perform the following steps:
1.
Go to the SYSTEM SETUP: Basic > Presentation Timer menu and highlight
Off. Press OK. A confirmation message appears.
2.
Highlight Yes and press OK to confirm. You will see the message "Timer is Off"
displaying on the screen.
Remote paging operations
Connect the projector to your PC or notebook with a USB cable prior to using the paging
function. See
You can operate your display software program (on a connected PC) which responds to
page up/down commands (like Microsoft PowerPoint) by pressing PAGE +/PAGE - on
the remote control.
If remote paging function doesn't work, check if the USB connection is correctly made and
the mouse driver on your computer is updated to the latest version.
The remote paging function cannot work with Microsoft
higher operating systems are recommended.
Freezing the image
Press FREEZE on the remote control to freeze the image. The word "FREEZE" will
display in the upper left corner of the screen. To release the function, press any key on the
projector or remote control.
Even if an image is frozen on the screen, the pictures are running on the video or other
device. If the connected devices have active audio output, you will still hear the audio even
though the image is frozen onscreen.
Hiding the image
In order to draw the audience's full attention to the presenter, you press ECO BLANK
to hide the screen image. When this function is activated with an audio input connected,
the audio can still be heard.
You can set the blank time in the
Blank Timer
time when there is no action taken on the blank screen.
If the preset time spans are not suitable for your presentation, select Disable.
No matter
projector or remote control to restore the picture.
Do not block the projection lens from projecting as this could cause the blocking object to become heated and
deformed or even cause a fire.
34
Operation
"Connection" on page 17
menu to let the projector return the image automatically after a period of
Blank Timer
is activated or not, you can press most of the keys on the
and press
for details.
®
Windows
SYSTEM SETUP: Basic > Operation Settings >
/
to highlight On and
®
98 operating system. Windows
®
XP or
Advertisement
Table of Contents
