Securing The Projector; Utilizing The Password Function - BenQ Gaming X300G User Manual

Securing the projector

To prevent theft or unauthorized use of the projector, please activate the
password function.

Utilizing the password function

Setting a password
Note
Once a password has been set and the Power On Lock is activated, the projector cannot be used
unless the correct password is entered every time the projector is started.
1. Go to the Advanced menu - System > Security Settings. Press OK. The
Security Settings page appears.
2. Highlight Change Password and press OK.
3. Press the arrow keys to enter six digits according to the password you
desire to set.
Note
The digits being input will be displayed as asterisks on-screen. Make a note of your selected
password and keep it in a safe place in advance or right after the password is entered so that it is
available to you should you ever forget it.
5. Confirm the new password by re-entering the new password.
6. To activate the Power On Lock function, go to System >
Security Settings > Power On Lock, press OK and / to select On.
Input the password again.
If you forget the password
If you enter the wrong password, the password error message will appear,
and the Input Password message will follow. If you enter an incorrect
password 5 times in succession, the projector will automatically shut
down in a short time. If you absolutely do not remember the password, you
can use the password recall procedure. See
procedure" on page
Entering the password recall procedure
1. Press and hold OK for 3 seconds. The projector will display a coded
number on the screen.
2. Write down the number and turn off your projector.
3. Seek help from the local BenQ service center to decode the number.
91.
"Entering the password recall
91