Front View Of Opening - Jenn-Air 750-0141 Manual

FRONT VIEW FOR BUILT-IN OPENING
3 in.(7.62cm)
2 in.(5.08cm)
The following are minimum dimensions necessary to install the Jenn-Air built-in 4 burner grills.
Width of grill head: 32 in.
Depth for grill control panel: 10 7/8 in.
Combustion Gap below control panel: 1 7/8 in.
A minimum of 6 in. clearance is needed from the right side of the grill firebox to non-combustible
materials. The rotisserie motor is located on the left side of the grill firebox.
A minimum of 8 in. clearance is required between the grill lid and any surrounding material to
allow for proper functioning of the rotisserie motor.
8 in.(20.32cm)
1 7/8 in.(4.76cm)
32 in.(81.28cm)
400
300 500
150 200
250
600
200 100 300
50 C 350
°
100 ° F 700
8
6 in.(15.24cm)
2 in.(5.08cm)