Front View For Built-In Opening - Jenn-Air 740-0165 (LP) Manual

FRONT VIEW FOR BUILT-IN OPENING

8 in.(20.32cm)
3 in.(7.62cm)
1 7/8 in.(4.76cm)
The following are minimum dimensions necessary to install the 4 burner + 1 sear burner built-in grills:
Width of grill head:
Depth for grill control panel:
Combustion Gap below control panel: 1 7/8 in.
A minimum of 6 in. clearance is needed from the right side of the grill firebox to non-combustible
materials. The rotisserie motor is located on the left side of the grill firebox.
A minimum of 8 in. clearance is required between the grill lid and any surrounding material to
allow for proper functioning of the rotisserie motor.
38 1/4 in.(97.16cm)
38 1/4 in.
10 7/8 in.
400
300 500
150 200
250
200 100 300 600
50 350
C
¡ ã
100 ¡ ã F 700
7
6 in.(15.24cm)