Adjusting The Width Of The Armrests - Invacare TDX SP User Manual

Hide thumbs Also See for TDX SP:
Table of Contents

Advertisement

9.2.2

Adjusting the width of the armrests

WARNING! Serious injury hazard if one of the armrests falls out of its
bracket because they have been adjusted to a width which exceeds
the permissible value!
• The width adjustment is fitted with small stickers with markings and the word "STOP"! The
armrests must never be pulled out further than the point at which the word "STOP" is
completely legible!
• Always tighten the fixing screws properly once adjustments have been completed!
Note
Depending on the side, the screw is accessible from the front or the rear.
Requirements:
• Allen key 8 mm
Carrying out adjustments
• Loosen screw (1)
• Adjust armrest to required
position.
• Retighten the screw.
• Repeat this procedure for the
second armrest.
54

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents