Invacare® Pronto™ M41 Series
1. Remove seat plate or sling seat. See Modulite service
manual.
2. Loosen and remove screws (3) and self-locking nuts
(1) in front and rear (2).
3. Adjust seat frame (2) to desired mounting position
(a, b or c).
See table Seat Height for different seat height values.
4. Refit screws and self-locking nuts.
5. Install seat plate or sling seat.
Seat height
Mounting position
a
b
c
4.6 Adjusting Seat Angle (Modulite)
•
6 mm Allen key
•
13 mm wrench
12
Seat plate
450 mm
470 mm
490 mm
Fig. 4-7
Fig. 4-8
Sling seat
480 mm
500 mm
520 mm
1568396-C