Adjusting The Width Of The Backrest (Modulite Seat Unit) - Invacare TDX SP User Manual

9.4.6

Adjusting the width of the backrest (Modulite seat unit)

You can adjust the backrest plate width to a certain degree by adjusting the front plate, e.g. in order
to adjust the backrest plate in line with the seat cushion. Fairly large adjustments must be made by
a service technician to the rear plate and are outlined in the service instructions for this mobility
device.
Note
The sling back is only available in two widths of 38-43 cm and 48-53 cm and, under certain
circumstances, must be replaced for a width adjustment. For a replacement description, see the
service instructions for this mobility device. The service instructions can be ordered from
Invacare®. However, they contain instructions for specially trained service technicians and
describe operations that are not intended for the end user.
Please note that if the sling back width is adjusted the backrest cushion must also be replaced.
Prerequisites:
• 1x 5 mm Allen key
64