Tripp Lite B092-016 Owner's Manual page 79

SDT Connector client software that is supplied with the gateway. However there is also a wide selection
of commercial and free SSH client programs that are supported:
PuTTY is a complete (though not very user-friendly:) freeware implementation of SSH for Win32 and
-
UNIX platforms
SSHTerm is a useful open source SSH communications package
-
SSH Tectia is a leading end-to-end commercial communications security solution for the enterprise
-
Reflection for Secure IT
-
solution
By way of example, the steps below show the establishment of an SSH connection and then forwarding
the RDP port over this SSH connection, using the PuTTY client software:
 Under the Session tab, enter the IP address of the Console Server in the Host Name or IP
address field.
For dial-in connections, this IP address will be the Local Address that you assigned to the

Console Server when you set it up as the Dial-In PPP Server
For Internet (or local/VPN connections) connections this will be the public IP address of the

Console Server
 Select the SSH Protocol, and the Port will be set as 22.
 Under the SSH -> Tunnels tab, Add new forwarded port specifying the Source port as 1234 (or
any number you choose).
 Set the Destination:
If your destination computer is network-connected to the Console Server, set the Destination

as <SDT Host IP address/DNS Name>:3389. For example, if the SDT Host IP Address you
(formerly F-Secure SSH) is another good commercial SSH-based security
79