Tripp Lite B092-016 Owner's Manual page 139

 Enter the Nagios Host Name that the Console Server will be referred to in the Nagios central
server – this will be generated from local System Name (entered in System: Administration) if
unspecified.
 In Nagios Host Address, enter the IP address or DNS name that the upstream Nagios server will
use to reach the Console Server – if unspecified this will default to the first network port's IP as
entered in System: IP).
 In Nagios Server Address, enter the IP address or DNS name that the Console Server will use to
reach the upstream Nagios monitoring server.
 Check the Disable SDT Nagios Extensions option if you wish to disable the SDT Connector
integration with your Nagios server at the head end – this would only be checked if you want to
run a vanilla Nagios monitoring.
 If not, enter the IP address or DNS name the SDT Nagios clients will use to reach the Console
Server in SDT Gateway Address.
 When NRPE and NSCA are both enabled, NSCA is preferred method for communicating with the
upstream Nagios server – check Prefer NRPE to use NRPE whenever possible (i.e. for all
communication except for alerts).
139