To restore a remote backup:
Click Browse in the Remote Configuration Backup menu and select the Backup File you wish to
restore.
Click Restore and click OK. This will overwrite all the current configuration settings in your
Console Server.
Alternately you can save the backup file locally onto the Console Server USB storage. To do this your
Console Server must support USB and you must have an internal or external USB flash drive installed.
To backup and restore using USB:
Ensure the USB flash is the only USB device attached to the Console Server and click Prepare
Storage in the Local Configuration Backup menu:
This will set a Volume Label on the USB storage device. This preparation step is only necessary
the first time, and will not affect any other information you have saved onto the USB storage
device. However it is recommended that you back up any critical data from the USB storage
device before using it with your Console Server
If there are multiple USB devices installed you will be warned to remove them:
153