Tripp Lite B092-016 Owner's Manual page 54

Enter the Console Server's IP address (or network name).

Enter the Server TCP Port number that matches the port you have configured for the serial

device on the remote Console Server. Ensure this port isn't blocked by a firewall.
o Telnet RFC2217 mode is configured by default so the range of port numbers available on
a 16-port console server would be 5001-5016
o Alternately check RAW mode (4001- 4048 on a 48 port console server)
o Select Encrypted to enable SSL/TLS encryption of the data going to the port. You will
need to enter a Password
Select the starting COM port (COM1 to COM4096).

Specify the number of ports you want to add. Sequential port numbers will be assigned

automatically. If a COM port # is already being used by other applications, that # will be skipped.
Click OK to add the specified COM ports.

To configure a COM port you have created, simply click on the desired COMx label in the left

hand menu tree.
In the Properties window you can edit the IP address or TCP Port to be used to connect to that

COM port.
You can then configure the COM port in the Connection and Advanced windows:

54