Table of Contents
Advertisement
Quick Links
Installation and Advanced Programming Instructions
HP8211-1RJ and HP8321-1RJ Heat Pump Thermostats
These instructions are intended for installation and first time set up of the thermostat.
For day to day use please refer to the User Instruction Sheet.
Contents
- Ordering Details for Series 8000 Product Range _________________________ 1
- Unpacking and installing the thermostat ________________________________ 1
- Setting the DIP switches (optional) ____________________________________ 2
- Attaching the thermostat to the wallplate ________________________________ 2
- Wiring Instructions _________________________________________________ 3
- Using remote sensors (optional) _____________________________________ 3
- Programming the event times (setbacks) and temperatures ________________ 4
- Summary table of Advanced Programing Mode (APM) options ______________ 5
- Trouble shooting guide _____________________________________________ 8
- Thermostat specification table _______________________________________ 8
- Contact information ________________________________________________ 8
Ordering Details for Series 8000 Product Range
Number of Stages & Application
1 Heat 1 Cool for heat/cool systems (no occupancy relay)
1 Heat 1 Cool for heat/cool or heat pump systems
2 Heat 2 Cool for heat/cool systems
2 Heat 2 Cool for heat/cool systems (battery operated)
2 Heat 1 Cool for heat pump systems
3 Heat 2 Cool for heat pump systems
Accessories
Remote room sensor
Duct mounting sensor
Outdoor sensor
Optional wall plate for 8000 Series thermostats
Unpacking and installing the thermostat
1. Thermostat location
Note: a wall plate (code no:
087N8000WP) is available to
cover a wider area when
retrofitting.
Model
HC8111-1
HC8111-1RJ
HC8221-1J
HC8220-1J
HP8211-1RJ
HP8321-1RJ
TS2/2
TS5
TS6
1810
2. Unpacking the thermostat
Code Number
087N6807NA
087N7224NA
087N6939NA
087N6940NA
087N6959NA
087N6963NA
087N728500
087N681200
087N681300
087N8000WP
1
Advertisement
Table of Contents
Related Manuals for Danfoss HP8211-1RJ
Summary of Contents for Danfoss HP8211-1RJ
-
Page 1: Table Of Contents
Installation and Advanced Programming Instructions HP8211-1RJ and HP8321-1RJ Heat Pump Thermostats These instructions are intended for installation and first time set up of the thermostat. For day to day use please refer to the User Instruction Sheet. Contents - Ordering Details for Series 8000 Product Range _________________________ 1... -
Page 2: Setting The Dip Switches (Optional)
Setting the DIP Switches ➔ ➔ ➔ ➔ ➔ Switch = On = Off Non-prog = 1 Off & 2 On Switch Location 2 Events = 1 Off & 2 Off 4 Events = 1 On & 2 Off A) It is advisable to make DIP switch settings prior 6 Events = 1 On &... -
Page 3: Wiring Instructions
Wiring Instructions for the thermostat HP8211-1RJ Model HP8321-1RJ Model Wiring Instructions for the Remote Sensors (if averaging is required) TS2/2 Sensor TS2/2 Sensor TS2/2 Sensor THERMOSTATS ALL 8000 TS2/2 Sensor TS2/2 Sensor TS2/2 Sensor TS2/2 Sensor THERMOSTATS ALL 8000 TS2/2 Sensor... -
Page 4: Programming The Event Times (Setbacks) And Temperatures
PROGRAMMING THE EVENT TIMES (SETBACKS) AND TEMPERATURES Note : This thermostat is delivered with DIP switches and advanced programming options factory preset to cover most common applica- tions. Should you require to change from any of the factory presets it is advisable to do so prior to setting the event times and temperatures as they may affect the following sequence. -
Page 5: Summary Table Of Advanced Programing Mode (Apm) Options
ADVANCED PROGRAMMING MODE (APM) OPTIONS SUMMARY For further details of the APM options refer to pages 6, 7 & 8. NOTE: If centigrade display has been selected then all temperatures will be the °C equivalent of the °F temperatures shown below. Option Description Default Setting Optional Setting... -
Page 6: Detailed Description Of Advanced Programming Mode (Apm) Options
DETAILED DESCRIPTION OF ADVANCED PROGRAMMING MODE (APM) OPTIONS To enter Advanced Programming Mode (APM) press and hold FAN and COPY buttons for 3 seconds. Note: the thermostat must be in nomal running mode (not programming mode). When in APM mode use the ▲ and ▼ buttons to scroll through the options available. Use the Next button to move onto the subsequent option. - Page 7 Option A Setting minimum heating temperature set point This feature allows the building owner to determine the minimum heating temperature available to the user. Option b Setting maximum cooling temperature set point This feature allows the building owner to determine the maximum cooling temperature available to the user. Option C Optimum start control, heating (OSC) (not available if “Non-Prog”...