Table of Contents
Advertisement
Danfoss ECtemp Touch
• An installation wizard with room/floor type-specific
setup.
• Support for multiple frame systems.
• Compatible with several 3rd party NTC sensors.
• Thermostat settings can be specified before instal-
lation and imported to the thermostat using a
web-generated code, or copied from a thermostat in a
similar installation.
• Smart access to thermostat settings after installa-
tion by using a web code interface for easy setup or
remote troubleshooting.
More information on this product can also be found at:
electricheating.danfoss.com
1.1
Technical Specifications
Operation voltage
Standby power consumption
Relay:
Resistive load
Inductive load
Sensing units
Installation Guide
220-240 V~, 50/60 Hz
Max. 0.40 W
Max. 16 A / 3680 W @ 230 V
cos φ= 0.3 Max. 1 A
NTC 6.8 kΩ at 25°C
NTC 10 kΩ at 25°C
NTC 12 kΩ at 25°C
NTC 15 kΩ at 25°C (Default)
NTC 33 kΩ at 25°C
NTC 47 kΩ at 25°C
3
Advertisement
Table of Contents
