Attaching The Optional Customer Display - Epson TM-T88V-DT User Manual

4. Connect the DC cable of the AC adapter to the power supply connector on the
product.
5. Insert the AC cable plug into a power outlet.

Attaching the Optional Customer Display

If you use the product with the optional customer display, follow the steps below
to attach customer display. If you use the product without the customer display,
skip this section and go to "Attaching the Connector Cover."
When using the L-shaped pole
1. Attach the base with the main body, and secure the base with the 3 screws.
(The base and the screws are included in the customer display package.) See
➊
in the illustration below.
2. Pass the USB cable through the cable hole. See
3. Align the dowel hole inside the pole and the dowel on the base, and attach
the pole with the base. See
4. Connect the USB cable with one of the USB connectors.
When using the Straight pole
Note:
The straight pole does not come out of the display once it is attached to it. Be sure of its
orientation when attaching it to the display.
1. Attach the base with the main body, and secure the base with the 3 screws.
(The base and the screws are included in the customer display package.) See
➊
in the illustration below.
2. With the end of the straight pole with a hole pointing downward, pass the
USB cable through the pole. See
3. Attach the pole with the display.
4. Pass the USB cable through the cable hole. See
➌
in the illustration below.
➋
in the illustration below.
TM-T88V-DT User's Manual 9
➋
in the illustration below.
Hole
Dowel
➌
in the illustration below.
English