English
5.
Align the dowel hole inside the pole and the dowel on the base, and attach
the pole with the base. See
6.
Connect the USB cable with one of the USB connectors.
Attaching the Connector Cover
To protect the cables, attach the connector cover in the steps below. When the
optional customer display unit is not installed, attach the connector cover with the
U-shaped part.
CAUTION:
Be sure to hold both sides of the customer display cover when attaching it,
or the connector cover may become damaged.
Note:
When pulling out the cables whose connectors do not lock themselves (USB cables and
Line-Out cable) from the cable exits on the back, fix the cables with the wire saddle to
prevent the cables from coming off.
10 TM-T88V-DT User's Manual
❹
in the illustration below.
Hole
Dowel