Connecting The Optional Wireless Lan Unit; Connecting The Optional Customer Display - Epson TM-T88VII Technical Reference Manual

Connecting the Optional Wireless LAN Unit

The optional Wireless LAN cable set (OT-WL06) enables you to use the product with a Wi-Fi connection.
For more information, refer to Technical Reference Guide of the Wireless LAN cable set.
• Be sure to turn off the printer when connecting the Wireless LAN unit.
• Depending on the installation conditions of the printer and the routing for cables connected to it,
• Do not disconnect the Wireless LAN unit from the printer while the printer is powered.

Connecting the Optional Customer Display

You can connect the customer display (DM-D30/DM-D70/DM-D110/DM-D210) to this product, using USB
connection.
For more information, refer to the Technical Reference Guide of the customer display.
• Be sure to turn off the printer when connecting the customer display.
• When using DM-D70 with the serial model and the parallel model, DM-D70 can be used only in the
• When connecting DM-D70 to the printer, make sure to attach the ferrite core came with DM-D70 to
the status of the radio waves for the Wireless LAN unit may decline. If this does happen, use an
extension cable.
fixed column and row mode.
the USB cable of DM-D70. For more information, refer to DM-D70 Technical Reference Guide.
Chapter 2 Setup
43