Security Hook - Epson TM-T88V-DT User Manual

Securing the Product
You can secure the product to the installation surface with optional affixing tape
(hook and loop fastener, four pairs, Model: DF-10), following the steps below.
1. Prepare four pairs of affixing tape.
2. Turn over the product so that you can see its bottom.
3. With two pieces of the affixing tape combined, peel off the backing paper of a
pair on one side, and paste it to one of the specified positions on the bottom of
the product. Illustration below shows the positioning lines for pasting the
pieces of the affixing tape.
4. In the same way, paste other three pairs of tape in the specified positions.
5. Peel off the backing paper of each pair on the other side of the affixing tape,
turn over the product back on its bottom, and place and secure it firmly to the
installation surface.
Affixing tape positioning
lines
Affixing tape positioning
lines

Security Hook

You can attach a commercially available security wire to the security hook.
Security hook
Positions to paste
affixing tape
Affixing tape positioning
lines
Affixing tape positioning
lines
TM-T88V-DT User's Manual 17
English