Removing The Connector Cover - Epson TM-T88V-DT User Manual

English
Connecting External Devices and the AC Adapter

Removing the Connector Cover

CAUTION:
Be sure to push the lower part of both sides of the connector cover inward
when attaching/removing it, or the connector cover may become damaged.
To connect external devices, first remove the connector cover, following the steps
below:
Push the connector cover down while pushing the lower part of the both sides of it
inward to detach the hooks from the printer case.
Connecting External Devices and the AC Adapter
CAUTION:
Be sure to use the specified AC adapter [AC adapter,T (Model: M284A)].
Connection to an improper power source may cause fire or shock.
Note:
The green identification tape on the cable of the AC adapter is for distinguishing the AC
adapter,T from another AC adapter in connection with another product. The tape has no
meaning for the TM-T88V-DT.
1. Make sure the product is turned off.
2. Connect each interface cable to the connectors on the back of the product. For
the position and shape of each connector, see the illustration below.
COM
Drawer-
kick
USB 6
×
3. Connect the AC cable to the AC adapter.
8 TM-T88V-DT User's Manual
DC Input
DisplayPort
Ethernet
Line-Out
VGA