Installing the Product
Important Notes
• The Product must be installed horizontally on a flat surface (not tilted).
• Do not place the printer in dusty locations.
• Do not knock or strike the Product. This may cause defective print.
• Do not catch cables and do not place foreign matter under the printer.
Attaching the Optional Customer Display
Setting the Customer Display
DM-D110 (dedicated model) has the DIP switches. The functions are as follows.
• Displaying self-test
• Setting the communication speed (Serial communication)
In normal use, you do not need to change the settings. If you change this setting, please match
the setting to that of the product. When used in ePOS-Device API / XML, you need to set with
EPSON TMNet WebConfig.
DIP Switch Functions
Remove the USB cable from the computer and remove the cover of the dip switch. If the
If you open the DIP switch cover, be sure to close the cover after setting the DIP switch.
DSW No.
1-1
1-2
1-3
1-4
USB cable is still connected to the computer during operation, this product may break
down due to short circuit, etc.
When used without the cover, it may cause a malfunction.
Function
Received Error Data
Receive Data Length
Parity
Parity Selection
ON
Ignore
Displays "?"
7bit
8bit
With Parity
No Parity
Even
Odd
Chapter 2 Setup
OFF
Default
OFF
OFF
OFF
OFF
47
2