Table of Contents
Advertisement
Connecting the LAN
Connect the LAN cable to the Ethernet port. (See
Network settings such as the IP address are set using the TM-T88VI-DT2 Utility or TMNet WebConfig.
Attaching the Customer Display
For the method to use dedicated customer display (DM-D110 for TM-T88V-DT/ TM-T88VI-DT2), see the
"DM-D110/ DM-D210 Technical Reference Guide".
For the method to attach a DM-D30, see the "DM-D30 Technical Reference Guide".
The USB port of the DM-D30 cannot be used.
• Systems that use TM-DT software
This is enabled using EPSON TMNet WebConfig.
• PC-POS System
The customer display is directly controlled from the application using Advanced Printer Driver for DM-D,
OPOS APD, or the like.
"Interface" on page
19.)
Chapter 2 Setup
2
26
Advertisement
Table of Contents
