Removing/Installing The Rear Wheels; Removing; Installing - Invacare Tracer SX5 Owner's Operator And Maintenance Manual

Armrest
Release
Lever
Arm Socket

Removing/Installing the Rear Wheels

NOTE: For this procedure, refer to FIGURE 11.6 on page 58.
If changing the size of the rear wheel or a change in the Seat-to-Floor Height is
desired, this procedure must be performed by a qualified technician.
Ensure both rear wheels are the same size before using.
Tracer SX5 recliner ONLY: Mount the rear wheels in the Rear Wheel Offset
Bracket ONLY. NEVER reposition the rear wheels to the forward position, as sta-
bility of the wheelchair will decrease, and injury or damage may result.

Removing

1. Note mounting position of existing rear wheel.
2. Remove the axle mounting screw and locknut that secure the existing rear wheel and
spacer to the wheel offset bracket.
3. Remove the existing rear wheel from wheel offset bracket.

Installing

1. Secure the new/existing rear wheel and spacer to wheel offset bracket with axle
mounting screw and locknut. Tourque locknut to 40 in-lbs.
Part No. 1110550
FIGURE 11.5 Removing and Installing Armrest
WARNING
Armrest
Armrest
Release
Arm Socket
57
SECTION 11—RECLINER
Button
Tracer
®
SX5