Stun - PURE M3700 User Manual

9.10 STUN

Section
STUN Server
NAT WAN IP
Item Field Description
Control Enable or Disable STUN Server service. Disable
Address Input this NAT WAN IP helps you to pass
through NAT without using STUN server.
The port number inside and outside NAT
should be the same. NAT WAN IP is the
fixed Public IP that used on NAT device
Note: If you disable STUN server and
input NAT WAN IP here, the RTP
(normally 4000) and Signaling (normally
5060) port number inside and outside
NAT must be the consistent, and Server
Port need to be configured on NAT
device.
75
M3700
user manual
Default
DCC NO. 91710015011