Make Inbound Transit Call - PURE M3700 User Manual

Notice: If you do not want to dial "#" after numbers, please configure the 'Dial Ending
Time' item. After the seconds configured here, the call will be sent automatically.
WEB Page: ADVANCED\GENERAL

7.9 Make Inbound Transit Call

To make an inbound transit call from PSTN to SIP, you have to enable Auto Answer function of this
gateway
Please enable Auto Answer configuration at
WEB Page: CHANNEL
If you don't enable the Auto Answer configuration, the inbound call from PSTN will be assigned to a
free FXS port of this gateway directly. It makes Inbound Transit Call impossible.
When Auto Answer function is enabled, the gateway will answer the call and calling side will hear
the second dial tone. For the Auto Answer function, it is also divided into Enable and Enable w/
Pincode options. The configuration page is the same as above.
Dial Inbound Transit Call when Auto Answer is configured as Enable
Please dial the number below after the second dial tone:
1. SIP Number + '#', Example: 73797# or
2. '#' + Index Number + '#', Example: #123#
If you still need to make a call to the FXS port of this gateway, please press "*" to seize a free FXS
port.
36